How To Flash Your QMobile J5000 Music Mobile:
Step 1: First Download QMobile J5000 Music Mobile Firmware/ Flash File and Extract Files On Your Computer.
Step 2: Then Install QMobile J5000 Music USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (RDA/ Coolsand USB Driver)
Step 2: Then Install QMobile J5000 Music USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (RDA/ Coolsand USB Driver)
Step 3: Open QMobile J5000 Music Mobile Flash Tool. (CM2 RDA Tool)
Step 4: QMobile J5000 Music Mobile Battery Remove And Then Insert Battery, Now First Click Setting Option And Then Select Setting And Select Your Boot. (SC6533G)
Step 5: Now Click Flash Option And Upload QMobile J5000 Music Firmware/ Flash File (
Step 6: Press Flash Option And Switch Off Your QMobile J5000 Music Mobile And Wait At Least (5 Sec) And Connect USB Cable Using Boot Key.
Step 7: Now Your QMobile J5000 Music Mobile Flash Processing Start, And Wait At Least 5 Minutes.
Step 8: After Download Complete ON Your Computer Screen, Then Remove QMobile J5000 Music Mobile USB Cable.
Step 9: Unplug Cable And Power ON QMobile J5000 Music Mobile And Press Power Button Your Phone.
Step 10: Now Your QMobile J5000 Music Mobile Is Complete.
*Read & Download...
QMobile J5000 Music Flash File Download:
| 1. Brand Name: | QMobile |
| 2. Model No: | QMobile J5000 Music |
| 3. File Name: | QMobile J5000 Music Firmware SC6533G.ilod |
| 4. File Size: | 4.00 MB |
| 5. CPU Type: | RDA/ Coolsand |
| 6. Compressed: | 7Zip And WinRAR |
| 7. File Source: | CM2 Dongle Backup |
| 8. Driver: | CoolSend USB Driver |
| 9. Tool: | CM2 RDA Tool |
| 10. Password: | NityanandoTelecom |
QMobile J5000 Music Flashing Information:
1. First Power Off Your Phone, Then Remove Battery And Insert Battery Back.
2. Please Hold Boot Key (UP and DOWN), And Insert a USB cable.
3. Now Open Miracle Boot Key In cases Boot key not Find.
4. Battery Should be Charged more than 40%
Scanning USB Serial port...
SU2Serial Port: COM17
Connecting to Phone, Wait...
Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x165E8AB7
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config: Loader
Boot IV : 0xFBA2A250
Boot Done!
writing, Wait...
Write Completed.
Join Facebook Group_Click Here
Join Telegram Group_Click Here
Take A Backup: If you are going to flash the above Firmware on your Mobile device, then take a backup of everything Because your Data will be Deleted after Flashing the Stock Firmware.
