How To Flash Your QMobile J3000 Pro Mobile:
Step 1: First Download QMobile J3000 Pro Mobile Firmware/ Flash File and Extract Files On Your Computer.
Step 2: Then Install QMobile J3000 Pro USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (RDA/ Coolsand USB Driver)
Step 3: Open QMobile J3000 Pro Mobile Flash Tool. (CM2 RDA Tool)
Step 4: QMobile J3000 Pro Mobile Battery Remove And Then Insert Battery, Now First Click Setting Option And Then Select Setting And Select Your Boot. (SC6533G)
Step 2: Then Install QMobile J3000 Pro USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (RDA/ Coolsand USB Driver)
Step 3: Open QMobile J3000 Pro Mobile Flash Tool. (CM2 RDA Tool)
Step 4: QMobile J3000 Pro Mobile Battery Remove And Then Insert Battery, Now First Click Setting Option And Then Select Setting And Select Your Boot. (SC6533G)
Step 5: Now Click Flash Option And Upload QMobile J3000 Pro Firmware/ Flash File (
Step 6: Press Flash Option And Switch Off Your QMobile J3000 Pro Mobile And Wait At Least (5 Sec) And Connect USB Cable Using Boot Key. (QMobile J3000 Pro Boot Key 0)
Step 7: Now Your QMobile J3000 Pro Mobile Flash Processing Start, And Wait At Least 5 Minutes.
Step 8: After Download Complete ON Your Computer Screen, Then Remove QMobile J3000 Pro Mobile USB Cable.
Step 9: Unplug Cable And Power ON QMobile J3000 Pro Mobile And Press Power Button Your Phone.
Step 10: Now Your QMobile J3000 Pro Mobile Is Complete.
*Read & Download...
QMobile J3000 Pro Flash File Download:
| 1. Brand Name: | QMobile |
| 2. Model No: | QMobile J3000 Pro |
| 3. File Name: | QMobile J3000 Pro Firmware SC6533G.ilod |
| 4. File Size: | 4.00 MB |
| 5. CPU Type: | RDA/ Coolsand |
| 6. Compressed: | 7Zip And WinRAR |
| 7. File Source: | CM2 Dongle Backup |
| 8. Driver: | CoolSend USB Driver |
| 9. Tool: | CM2 RDA Tool |
| 10. Password: | NityanandoTelecom |
QMobile J3000 Pro Flashing Information:
1. First Power Off Your Phone, Then Remove Battery And Insert Battery Back.
2. Please Hold Boot Key (UP and DOWN), And Insert a USB cable.
3. Now Open Miracle Boot Key In cases Boot key not Find.
4. Battery Should be Charged more than 40%
Scanning USB Serial port...
SU2Serial Port: COM17
Connecting to Phone, Wait...
Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x165E8AB7
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config: Loader
Boot IV : 0xFBA2A250
Boot Done!
writing, Wait...
Write Completed.
Join Facebook Group_Click Here
Join Telegram Group_Click Here
Take A Backup: If you are going to flash the above Firmware on your Mobile device, then take a backup of everything Because your Data will be Deleted after Flashing the Stock Firmware.
