How To Flash Your Evercoss F6 Mobile:
Step 1: First Download Evercoss F6 Mobile Firmware/Flash File and Extract Files On Your Computer.
Step 2: Then Install Evercoss F6 USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (MTK USB Driver)
Step 3: Open Evercoss F6 Mobile Flash Tool. (SP Flash Tool)
Step 2: Then Install Evercoss F6 USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (MTK USB Driver)
Step 3: Open Evercoss F6 Mobile Flash Tool. (SP Flash Tool)
Step 4: Then Click Load Packet And Upload Evercoss F6 Firmware/ Flash File (GAOPHONE60D_11B_BB.cfg) File with Tool.
Step 5: Press Start Button And Switch Off Your Evercoss F6 Mobile And Wait At Least (5 Sec) And Connect USB Cable Using Boot Key. (Center+0 Boot Key)
Step 6: Now Evercoss F6 Mobile Flash Processing Start, Now Wait At Least 5 Minutes.
Step 7: After Download Complete ON Your Computer Screen, Then Remove Evercoss F6 Mobile USB Cable.
Step 8: Unplug Cable And Power ON Evercoss F6 Mobile And Press Power Button Your Phone.
Step 9: Now Your Evercoss F6 Mobile Is Complete.
*Read & Download...
Evercoss F6 Flash File Download:
| 1. Brand Name: | Evercoss |
| 2. Model No: | Evercoss F6 |
| 3. File Name: | Evercoss F6 Firmware_MT6260 |
| 4. File Size: | 7.97 MB |
| 5. CPU Type: | MTK6260DA |
| 6. Compressed: | 7Zip And WinRAR |
| 7. File Source: | SP Tool Backup |
| 8. Driver: | MTK USB Driver |
| 9. Tool: | SP Flash Tool |
| 10. Password: | NityanandoTelecom |
Download Evercoss F6 Flash Tool & Driver:
Join Facebook Group_Click Here
Join Telegram Group_Click Here
Take A Backup: If you are going to flash the above Firmware on your Mobile device, then take a backup of everything Because your Data will be Deleted after Flashing the Stock Firmware.
