How To Flash Your Evercoss C1S Mobile:
Step 1: First Download Evercoss C1S Mobile Firmware/ Flash File and Extract Files On Your Computer.
Step 2: Then Install Evercoss C1S USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (SPD USB Driver)
Step 3: Open Evercoss C1S Mobile Flash Tool. (Miracle Box Tool)
Step 4: Evercoss C1S Mobile Battery Remove And Then Insert Battery, Now First Click SPD Option And Then Select Write Flash Option And Select Your Boot. (SC6531)
Step 2: Then Install Evercoss C1S USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (SPD USB Driver)
Step 3: Open Evercoss C1S Mobile Flash Tool. (Miracle Box Tool)
Step 4: Evercoss C1S Mobile Battery Remove And Then Insert Battery, Now First Click SPD Option And Then Select Write Flash Option And Select Your Boot. (SC6531)
Step 5: Then Upload Evercoss C1S Firmware/ Flash File (
Step 6: Press Start Button And Switch Off Your Evercoss C1S Mobile And Wait At Least (5 Sec) And Connect USB Cable Using Boot Key.
Step 7: Now Evercoss C1S Mobile Flash Processing Start, Now Wait At Least 5 Minutes.
Step 8: After Download Complete ON Your Computer Screen, Then Remove Evercoss C1S Mobile USB Cable.
Step 9: Unplug Cable And Power ON Evercoss C1S Mobile And Press Power Button Your Phone.
Step 10: Now Your Evercoss C1S Mobile Is Complete.
*Read & Download...
Evercoss C1S Flash File Download:
| 1. Brand Name: | Evercoss |
| 2. Model No: | Evercoss C1S |
| 3. File Name: | Evercoss C1S Firmware SC6531_W25Q32BV.bin |
| 4. File Size: | 4.00 MB |
| 5. CPU Type: | SPD6531 |
| 6. Compressed: | 7Zip And WinRAR |
| 7. File Source: | Miracle Box Backup |
| 8. Driver: | SPD USB Driver |
| 9. Tool: | Miracle Tool |
| 10. Password: | NityanandoTelecom |
Download Evercoss C1S Flash Tool & Driver:
Evercoss C1S Flash File Details:
CPU type: 6531
Flash type: NOR
Flash ID: 00EF0040(00160000)
Flash Model: W25Q32BV
Flash Size: 0x400000(4.0M)
Evercoss C1S Flashing Information:
1. First Power Off Your Phone, Then Remove Battery And Insert Battery Back.
2. Please Hold Boot Key (UP and DOWN), And Insert a USB cable.
3. Now Open Miracle Boot Key In cases Boot key not Find.
4. Battery Should be Charged more than 40%
Scanning USB Serial port...
SU2Serial Port: COM17
Connecting to Phone, Wait...
Done.
Infor: SPRD3
Initialize boot9...
CPU type: 6531
Flash type: NOR
Flash ID: 00C80060(00160000)
Flash Model: W25Q32BV
Flash Size: 0x400000(4.0M)
writing,Wait...
Write Completed.
Join Facebook Group_Click Here
Join Telegram Group_Click Here
Take A Backup: If you are going to flash the above Firmware on your Mobile device, then take a backup of everything Because your Data will be Deleted after Flashing the Stock Firmware.
